Table of Contents
Advertisement
until the last digit is entered and press the right
button once more.
4.
Press the middle button to enter the PIN code
(Figure
34D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
position locks the protected menu.
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O
allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
change the setting in the Protected Menu. After you
set the PIN code, rotate the key switch O
to the O
position to enable and save this feature.
N
Setting the Auto Idle
1.
In the Settings Menu, scroll down to Auto Idle.
2.
Press the right button to change the auto idle
time between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum
Allowed Mow Speed
1.
In the Settings Menu, scroll down to Mow Speed
and press the right button.
2.
Use the right button to increase the max full
mow speed (50%, 75%, or 100%).
3.
Use the center button to decrease the max full
mow speed (50%, 75%, or 100%).
4.
Press the left button to exit.
Setting the Maximum
Allowed Transport Speed
1.
In the Settings Menu, scroll down to Transport
Speed and press the right button.
2.
Use the right button to increase the max
transport speed (50%, 75%, or 100%).
3.
Use the center button to decrease the max
transport speed (50%, 75%, or 100%).
position and
FF
hides the protected
N
and back
FF
4.
Press the left button to exit.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.
Setting the Service Due
Timer
This resets the service due hours after a scheduled
maintenance procedure is performed.
1.
In the S
ERVICE
M
.
ENU
2.
Scroll down to the service symbol
Note:
If service is currently due, the first icon
shows N
.
OW
3.
Below the first icon is the service symbol
and 250.
4.
Highlight the service symbol and press the right
button.
5.
When the new screen appears, confirm R
S
H
ERVICE
OURS
6.
Select Y
(center button) or N
ES
7.
After you select Y
clearing and reverts back to the S
selections.
36
M
, navigate to the H
ENU
.
—Are you sure?
(left button).
O
, a screen prompts the
ES
ERVICE
OURS
ESET
H
OURS
Advertisement
Table of Contents
