Upper Basket With Variable Height Setting; Folding Tines - Beko DH1255X Installation & Operation Instructions

Upper basket with variable
height setting
The upper basket is equipped with a
lifting mechanism which enables you
to change the height of the basket
without having to remove it from the
dishwasher, even if it is fully loaded.
�
The height of the upper basket was
set to its lowest position at the factory.
To lift the upper basket to the "high"
(A) position, hold it on one side and
carefully pull it upwards. To lift the
opposite side of the basket, hold it and
pull it upwards in the same manner (A).
To lower the upper rack, hold and
press in the rack lever on one side
and carefully lower the rack without
releasing the lever (B). Repeat the
procedure with the lever on the
opposite side of the basket. Make sure
that both levers catch at the same
height.
�

Folding Tines

There are "folding tines" in the upper
rack to allow you more space to
�
accommodate glasses or cups. �
Simply pull in the first front folding tine,
move it to left (A) and right (B) to place
in another positon. When you need,
take the tines down until the tines fall
down.
19 GB