First-Time Operation - Panasonic UT-MB5000 Series Operating Instructions Manual

First-time Operation

20
5 Setup Windows.
Follow the on-screen instructions.
z The computer restarts several times. Do not touch the screen
or tablet buttons, and wait until the drive indicator
turned off.
z After the computer is turned on, the screen remains black or
unchanged for a while, but this is not a malfunction. Wait for
a moment until the Windows setup screen appears.
z Setup of Windows will take approximately
utes /
Follow the steps below.
z
A When "Enable sensors" is displayed, touch
B
touch
C
The computer restarts automatically, and the setting is en-
abled.
"Join a wireless network" screen may not ap-
z
pear.
You can set the Wireless Network after the setup of Windows
is complete.
CAUTION
z You can change the user name, password, image and security
setting after setup of Windows.
z Remember your password. If you forget the password, you can-
not use Windows. Creating a password reset disk beforehand is
recommended.
z
AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &,
space. In particular, if you create a user name (account name)
that includes the "@" mark, a password will be requested at the
log-on screen, even if no password has been set. If you try to
log on without entering a password, "The user name or pass-
word is incorrect." may be displayed and you will not be able
to sign in /
page 35).
6 Create the recovery disc.
A recovery disc allows you to install OS and restore its factory
default condition, in case, for example, the recovery partition
recovery disc before you begin using the computer.
Refer to Î Reference Manual "Recovery Disc Creation Util-
ity" about creating the disc.
20 minutes.
log on to Windows (Î
has
5 min-
ouch