Table of Contents
Advertisement
Troubleshooting
Drying process lasts long.
• Pores of the Air inlet filter in front of the machine might be clogged. >>> Wash the Air inlet filter with lukewarm
water.
• The Air inlet filter in front of the machine might be blocked. >>> Remove everything, if any, that is blocking ventilation
in front of the Air inlet filter.
• Ventilation may be inadequate due to the very small area of installation. >>> Open the doors and windows to avoid
too much increase in the ambient temperature.
• Excessive laundry was loaded in. >>> Do not overload the Washer-Dryer.
• Laundry may not have been spun adequately. >>> Have the Washer-Dryer perform spin in a higher spin speed
during washing step.
• Tap is turned off. >>> Open the taps.
Laundry remains wet at the end of drying.
• Improper programme might have been used for the laundry type >>> Select a proper programme for the type of the
laundry by checking the maintenance tags on the clothes or use time programmes additionally.
• Pores of the Air inlet filter in front of the machine might be clogged. >>> Wash the Air inlet filter with lukewarm
water.
• Excessive laundry was loaded in. >>> Do not overload the Washer-Dryer.
• Laundry may not have been spun adequately. >>> Have the Washer-Dryer perform spin in a higher spin speed
during washing step.
Machine does not turn on or the programme does not start.
• Power cable might not be plugged in. >>> Make sure that the power cable is plugged in.
• Programme might not be set or Start / Pause / Cancel button might not be pressed. >>> Make sure that the
program has been set and the machine is not in Pause mode.
• Child lock might be enabled. >>> Deactivate the Child Lock.
Laundry is shrunk, yellowed, felted or damaged.
• Improper programme might have been used for the laundry type >>> Select a proper programme for the type of the
laundry by checking the maintenance tags on the clothes or use time programmes additionally. Laundry not suitable
for drying should not be dried.
Drying cannot be performed
• Laundry might not be dry or drying function has not been enabled. >>> Check if drying function is also selected after
the selected washing programme.
Loading door cannot be opened.
• Loading door of the machine may not be opened due to safety reasons. >>> If "wait to cool down to open...."
warning is displayed, machine will keep the loading door locked for your safety until it cools down. You can accelerate
cooling by running any 10-minute drying programme.
User's Manual
61 / EN
Advertisement
Table of Contents
