ENGLISH
PRECAUTIONS FOR SAFETY
DANGER
•
Do not install, repair, open or remove the cover. It may expose you to dangerous voltages. Ask the dealer or
the specialist to do this.
•
Turning off the power supply will not prevent potential electric shock.
•
The appliance shall be installed in accordance with national wiring regulation.
•
Means for disconnection from the supply having a contact separation of at least 3 mm in all poles must be
incorporated in the fixed wiring.
WARNING
•
Do not expose your body directly to cool air for a long time.
•
Do not insert your finger or any article into the air inlet/outlet.
•
When an abnormality (burning smell, etc.) occurs, stop the air conditioner and disconnect the power supply or turn
off the breaker.
CAUTION
•
Do not wash the unit with water. It may cause an electric shock.
•
Do not use this air conditioner for other purposes such as preserving food, breeding animal, etc.
•
Do not step or put anything on the indoor/outdoor unit. It may cause an injury or damage the unit.
•
Before cleaning the unit, turn off the main switch or the circuit breaker.
•
When the unit won't be used for a long time, turn off the main switch or the circuit breaker.
INDOOR UNIT DISPLAY
1
Hi POWER (Green)
2
FILTER (Orange)
3
PRE.DEF or FAN-ONLY (Orange)
4
TIMER (Yellow)
5
OPERATION (Green/*Orange)
6
RESET button
* Orange : Auto Restart Operation
PREPARATION BEFORE USE
Preparing Filters
1. Open the air inlet grille and remove the air filters.
2. Attach the filters. (see detail in installation manual)
Loading Batteries
1. Remove the cover. Insert 2 new batteries (AAA type) following the (+) and (–) positions.
2. Push RESET : Adjust the clock.
2.1 Push CLOCK (adjust only).
2.2 Press
and
: Set the current time.
2.3 Press
: Start the clock.
3. Place the cover back.
Remote Control Location
•
Max. 7 m from the indoor unit
AIRFLOW DIRECTION
1. Press
: Move the louver in the desired
vertical direction.
2. Press
: Swing the air automatically and
press again to stop.
3. For horizontal direction, adjust manually.
Note:
•
Use only the
button to move the louver.
•
The swinging operation needs to be set up
every time after turning ON.
(18~24k)
(Heating model)
Hi POWER FILTER PRE.DEF
TIMER
OPERATION
+
+
+
+
+
1 2 3 4
5
(Cooling model)
Hi POWER FILTER FAN-ONLY TIMER
OPERATION
+
+
+
+
+
1 (
0
~
1
6
) k
RESET
Hi POWER FILTER PRE.DEF
6
1
2 3 4
RESET
Hi POWER FILTER FAN-ONLY TIMER
7 m
1
2
(
H
e
t a
n i
g
m
o
d
e
) l
TIMER
OPERATION
5
(Cooling model)
OPERATION
1
3