Table of Contents
Advertisement
Installation
Your TV is packaged with the stand and the cabinet separated. Before using
the TV, install the stand as described below, or if you want to mount it to a
wall, see the next page for mounting advice (wall mount is not included).
• Make sure the TV is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
WARNING:
•
as this may damage the infra-red remote sensor at the bottom of the TV.
Attaching the Stand
Step 1
Place a soft cushioned material on top of a
flat surface to prevent damaging the screen
panel. Then place the TV screen flat on
top, with the screen side facing down, as
illustrated on the right (1).
Step 2
Align the stand base to the installation
point, as illustrated on the right (2).
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the panel,
as illustrated on the right (3).
CAUTION!
•
Do not apply excessive force as this may
damage the screw holes.
•
Unplug the power plug first when installing
or removing the TV Stand.
•
To avoid any damage to this TV, we
recommend you ask someone to help with
installation and/or removal of the stand.
12
Do not place the TV standing upright without its stand attached,
1
2
R
3
L
Advertisement
Table of Contents
