1. Load 8 new Alkaline or Lithium AA batteries for long term use or 4 for short term use.
2. Insert SD card. Camera accepts SD cards from 8mb-8GB in size.
3. Control buttons function as described below:
• "MENU" : enter or exit the programming or delete menu
,
•
button to manually take photos/videos.
• "OK" : used to save changes and to review photos/videos
1.
To enter custom programming, turn the cameras power switch to the "SETUP" position.
2.
Press the menu button to begin programming.
3.
Note that "CAM" is highlighted. Press
that "Photo or Video" will be highlighted, use the
press "OK" to save. If you choose "Photo" proceed to step 4, if you choose video proceed
to step 6.
4.
Press
to enter "Photo Size". Use
to save.
5.
Press
to enter "Photo Burst". Use
to save.
6.
If you chose "Photo" in step 3, skip to step 8. If you chose "Video" in step 3, Press
enter "video size". Use
high resolution video (640x480), HVGA is low res (320x240).
7.
Press
to highlight "video length". Use
seconds and press "OK" to save.
,
,
: used to navigate through the menu.
Custom Programming
or
to choose VGA or QVGA and press "OK" to save. VGA is
Covert MP6
Getting started
to make changes to "Camera" settings. Note
or
or
to choose 3MP, 5MP, or 6 MP and press "OK"
or
to choose 1, 2, or 3 photos and press "OK"
or
to choose video length from 5-60
also serves as "record"
to choose photo or video and
to
Need help?
Do you have a question about the MP6 and is the answer not in the manual?
Questions and answers