Table of Contents
Advertisement
Quick Links
MODEL:
TLCN-CRRGBW
INTRODUCTIONS
IMPORTANT: READ ALL INSTRUCTIONS PRIOR TO INSTALLATION
Product Data
• Output RF signal
• Operation Frequency 915MHz
• Operating temperature 0-40°C
• Relative humidity 8% to 80%
• Dimensions 140x48x17mm
• Control 6 zones of RF receivers separately, and 6 scenes (of zones)
• RGBW color controller
• High sensitivity & stable touch color wheel; fast, precise color control.
• Compatible with all universal series RF receivers
• 1 receiver can be paired by max 8 different remote controls.
• Waterproof grade: IP20
• Power Supply 4.5V(3xAAA battery)
WARNNINGS
THIS DEVICE CONTAINS AAA BATTERIES THAT SHALL BE STORED AND DISPOSED PROPERLY.
DO NOT EXPOSE THE DEVICE TO MOISTURE.
FUNCTION INTRODUCTION
•
[W] White channel: Click to turn on/off, Press and hold down to increase or
decrease intensity of the channel
•
[<<] Press and hold down to slow down dynamic mode
•
[▼] Press and hold down to decrease overall intensity
•
[R] [G] [B] Channel buttons. Press and hold to increase or decrease the intensity
of R.G.B. channels
•
[1] [2] [3] [4] [5] [6] Zones of control Scene selection
•
Indicator: indicates the state of remote control
•
Touch Dial to change colour
•
[▲] Press and hold down to increase overall light intensity
•
[Φ] Click to turn ON/OFF all zones
•
[>>] Press and hold down to speed up dynamic mode
•
[►] Play/Pause button, click to play/pause for 10 built-in modes
•
[S] Scene selection, programing button
TA M L I T E L I G H T I N G
|
1 0 P e r d u e C o u r t , C a l e d o n , O n t a r i o , L 7 C 3 M 6
INSTALLATION INSTRUCTIONS
RF RGBW
Remote Controller
|
W W W.TA M L I T E . C A
Advertisement
Table of Contents
Related Manuals for Tamlite TLCN-CRRGBW
Summary of Contents for Tamlite TLCN-CRRGBW
- Page 1 INSTALLATION INSTRUCTIONS RF RGBW Remote Controller MODEL: TLCN-CRRGBW INTRODUCTIONS IMPORTANT: READ ALL INSTRUCTIONS PRIOR TO INSTALLATION Product Data • Output RF signal • Operation Frequency 915MHz • Operating temperature 0-40°C • Relative humidity 8% to 80% • Dimensions 140x48x17mm • Control 6 zones of RF receivers separately, and 6 scenes (of zones) •...
- Page 2 INSTALLATION INSTRUCTIONS RF RGBW Remote Controller INSTALLATION OPERATION 1 - Pair with RF receivers: Confirm that the jumper is set to receiver. If not, move to correct position If this is a new installation, Press and hold down “Learning Key” on the receiver for approximately 3 seconds until connected LED lights flicker twice, this means any previous pairings have been deleted successfully.
Need help?
Do you have a question about the TLCN-CRRGBW and is the answer not in the manual?
Questions and answers