Care And Cleaning - identités 861140 User Manual

Table of Contents

Advertisement

Available languages

Available languages

Start switch
-
Set controller 1 to a temperature between 1 and 3 to heat the cushion
Stop switch
-
Set the level to 0 on the controller to turn off the heating pad. If you will be using the cushion for several
hours, set the controller to 2
Temperature selection
Set the level to maximum (level 3) before use. This will allow for faster heating.
Temperature level
Set the temperature level on the controller (see fig.A)
Setting 0 = Off
Settings 1+2 = Low heat
Settings 3+4 = Medium heat
Settings 5+6 = High heat
Automatic shutdown
NOTE: The heating pad will automatically turn off after 90 minutes. The LED indicator on the controller will
display "A"
-
Select the "0" position and after about 5 seconds select the desired temperature level
Change the heating pad to "OFF" (Level "0") or remove the cables from the socket if you do not wish to use the
automatic shut-off function. Then to use the device, please connect the controller to the heating pad first by
connecting it to connector 2. (fig. b)
To ensure the longest possible life, check the condition of the product, including the presence of tears and the
condition of the battery, before each use.

CARE AND CLEANING

Failure to care for your product may result in the risk of serious injury.
- Use the heating pad with the cloth cover to avoid soiling or damaging the device (especially if you use
essential oils or creams)
- Before cleaning the heating pad, always remove the power cables from the socket and separate the power
connector from the controller (fig. B)
- Do not reconnect the controller to the heating pad if it is not dry
- Do not turn on the heating pad to dry the unit
- Do not use chemicals to clean the heating pad or the controller, otherwise they may be damaged
- Never immerse the controller in water or other liquids
- Do not hang the unit up to dry with clothes pegs. This could damage the unit. Instead, use a dry, lint-free
cloth to clean and maintain the heating pad and controller
- To remove stubborn stains from the heating pad, you can lightly soak the cloth with a mild detergent
- First open the Velcro on the cover and remove the heating pad
- Clean the cover in accordance with the cleaning symbols on the label
- The heating pad and the cover are washable. Set the washing machine programme to 30°C (delicate)
- Do not bleach, do not use detergents containing bleach
DMI-F-03_Annexe 3_Notice 3_Version 1.0
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

861141

Table of Contents