Advertisement
1
Install the Center Boom
Brackets and Cover
Parts needed for this procedure:
2
Center boom bracket (models 2014 and older)
2
Boom mount plate
4
U-nut
4
Hex head screw, 3/8 x 1-1/4 inch
1
Model/serial number decal
1
Regulatory decal (119-4986)
4
Flange nut (3/8 inch)
2
Washer plate
4
Hex head screw, 5/16 x 1-1/4 inch
2
Center-boom bracket (models 2015 and newer)
Procedure
Attach the model/serial number decal and the regulatory
decal to 1 of the center boom brackets as shown in
Note: Before applying the decals, clean the decal area and
ensure that it is free of dirt, grease, or other foreign material.
For models 2014 and older:
1. Install each of the 2 center brackets and boom mount
plates to the center boom using 2 hex-head bolts (3/8
x 1-1/4 inch) and 2 flange nuts (3/8 inch) as shown
in
Figure
2.
Note: When mounting the kit to a sprayer, use the
holes in the center bracket to attach the kit to the unit.
When mounting the kit to a Workman, use the holes in
the boom mount plate to attach the kit to the unit.
2. Install the center cover assembly to the center boom
brackets using 4 U-nuts 2 washer plates, and 4 hex-head
bolts (5/16 x 1-1/4 inch) as shown in
For models 2015 and newer:
1. Install the center-cover assembly to the bracket using
4 U-nuts, 2 washer plates, and 4 hex-head bolts (5/16
x 1-1/4 inch) as shown in
Figure
2.
Figure
2.
Figure
1.
1
2
3
4
5
2015 models and newer
1. Flange nut (3/8 inch)
2. Bracket
3. Center-boom cover
4. Washer plate
2. Install each of the 2 center brackets and boom mount
plates to the center boom using 2 hex-head bolts (3/8
x 1-1/4 inch) and 2 flange nuts (3/8 inch) as shown
in
Figure
1.
2
Install the Wing Boom Covers
Parts needed for this procedure:
2
Wing-boom cover
16
Washer plate
12
U-nut
12
Hex-head bolts, 5/16 x 1-1/4 inch
Procedure
1. Orient the spray nozzles on both wing booms straight
downward so that it can fit in the holes of the wing
boom covers.
2. Install 1 of the wing boom covers
washer plates, 6 hex-head bolts (5/16 x 1-1/4 inch),
and 6 U-nuts.
3. Repeat step
2
to install the other wing-boom cover.
2
6
7
g0302 99
Figure 1
5. Hex head screw (5/16 x
1-1/4 inch)
6. U-nut
7. Flange nut (3/8 inch)
(Figure
2) using 8
Advertisement
