Subscribe to Our Youtube Channel
Related Manuals for Yealink BH72
Summary of Contents for Yealink BH72
- Page 1 Yealink BH72 Headset Revision History Revision Date Description Initials 3/14/22 First published version. Version 1.0...
- Page 2 2: Connect other end of USB cable to USB port on PC *Note this can also be used with a Yealink phone or most other phones with usb port using same steps. Compatibility with phones other than Yealink may vary.
-
Page 3: Using Bluetooth
2: On PC go to Bluetooth Menu (Settings ->Devices -> Bluetooth and other devices - >Add Bluetooth or other device) 3: From List choose Yealink BH 72 *Note this can also be used with a Yealink phone with a Bluetooth radio installed. See phone documents for Bluetooth instructions. Compatibility with phones other than Yealink may vary. v1.0... - Page 4 BH72 Lights Buttons and Controls Power on 1: To power on Press Power button. 2: To power off Press Power button and hold for 2 seconds. v1.0...
-
Page 5: Change Volume
Controls *Call controls such as hang up and answer do not work with NHC UC Max soft phone. Change Volume To Raise Volume press button. To Lower Volume press button. Mute Call There are 2 ways to Mute the call on this headset. Push the Boom Mic back inside the headset or press the button. - Page 6 Busy Light Status Incoming Call On Call If Teams Enabled and using Teams Connecting to Teams Connected to Teams v1.0...
-
Page 7: Charging Headset
2: Connect other end of USB cable to USB port on PC (Or 5V USB power brick) Wireless Charging 1: Place Left earcup with symbol on QI enabled Yealink charging stand with the same symbol. 2: Light will go red indicating that wireless charging has started. See LED charging status below. v1.0... - Page 8 Yealink USB Connect (Recommended) Yealink USB Connect is a computer software designed to manage Yealink USB devices. With Yealink USB Connect you can: • Get an overview of connected Yealink USB devices • Manage your Yealink USB devices (for example, change basic/advanced settings, BT50 pair management) •...
- Page 9 Yealink Update Firmware Connect the base to the power supply and PC. Dock the headset in a base. Update the base firmware via Yealink USB Connect. Click - Check for updates (cloud) Or - Update manually (manual FW File on PC) Important: You need to connect the PC to the micro-USB port of the headset marked with the text "PC".
- Page 10 Click on Tools Then Select Options Click On Audio Options Select Yealink BH72 (BT51 if using Bluetooth Adapter) from drop down menus for Microphone and In-call Audio Select a source from the drop down list you wish the notification and ringing to play.
Need help?
Do you have a question about the BH72 and is the answer not in the manual?
Questions and answers