Setup; Mounting The Battery Charger (Optional) - Toro SnowMaster e24 Operator's Manual

Setup

Important:
The battery pack is not fully charged when you purchase it. Before using the machine for
the first time, refer to
1

Mounting the Battery Charger (Optional)

Parts needed for this procedure:
2 Mounting hardware (not included)
Procedure
If desired, mount the battery charger securely on a wall using the wall-mount key holes on the back of the
charger.
Mount it indoors (such as a garage or other dry place), near a power outlet, and out of the reach of children.
Refer to Figure 3 for assistance in mounting the charger.
Slide the charger over the appropriately positioned hardware to secure the charger in place (hardware not
included).
Charging the Battery Pack (page 16).
Figure 3
9
g290534