See3CAM_80 Hardware User Manual 14-Aug-2013 Contents Revision History ........................3 Introduction ..........................4 Scope ............................4 Disclaimer ..........................4 Description..........................4 Setting up the See3CAM_80 ....................5 See3CAM_80 to PC Host interconnecting Cable ............5 Connecting the board with Host ..................6 6.2.1 Identification of USB3.0 Connector ................
See3CAM_80 Hardware User Manual 14-Aug-2013 See3CAM_80 1 Revision History Date Description Author August 14, 2013 Initial Draft Kasthuri Rangan Confidential Page 3 of 8...
4 Disclaimer The specifications of See3CAM_80 camera board and instructions on how to connect this board with PC are provided as reference only and e-con Systems reserves the right to edit/modify this document without any prior intimation of whatsoever. 5 Description...
See3CAM_80 board with e-CAM80_MI8825_MOD • USB3.0 Cable • 6.1 See3CAM_80 to PC Host interconnecting Cable The USB3.0 A to micro-B type cable is used to connect See3CAM_80 camera board to the PC will be supplied by e-con Systems. Confidential Page 5 of 8...
The location of USB3.0 connector on See3CAM_80 is shown in below figure Figure 3: Location of USB3.0 Connector 6.2.2 Insertion of USB3.0 Cable in Connector The USB3.0 Cable provided by e-con Systems with should be inserted with USB3.0 connector as shown in below figure. Confidential...
See3CAM_80 Hardware User Manual 14-Aug-2013 Figure 4: USB3.0 cable inserted in USB3.0 connector 6.2.3 Connecting the board to Host Identify a USB3.0 port. The port which has the below logo is USB3.0 Port. Figure 5: Superspeed USB 3.0 Logo The USB3.0 cable needs to be inserted to superspeed USB3.0 port of PC or Laptop. Figure 6: USB3.0 Cable –...
See3CAM_80 Hardware User Manual 14-Aug-2013 Figure 7: Connecting USB3.0 Cable to Superspeed Port After the insertion of USB3.0 Cable with USB3.0 connector on the board and USB Host, the LED (D7) will glow in Red colour. This indicates that the board is powered ON. Figure 8: Status LED indicating Board Powered ON.