Lascar Electronics EasyLog CC-2 Quick Start Manual

EasyLog CC-2
1. Your new logger comes ready to go.
Simply press and hold the
Preset high
and low alarm
levels
Status LEDs
2.
Now place your logger in the location you want to monitor.
Once logging, pressing the
status. It will also add a marker to the data to show that you have checked it.
monitored conditions.
www.lazodecontrol.com
www.lascarelectronics.com/data-loggers
button until the green LED lights up to start logging.
button will light up an LED to give a quick indication of the
The data logger is currently logging
No alarm has been triggered
The data logger is currently logging
An alarm has been triggered!
The data logger's memory is full
No alarm was triggered
The data logger's memory is full
An alarm was triggered!
No action required
Check alarm condition in PC software
Plug your logger in to a PC and download
your readings
Plug your logger in to a PC, download your
readings and check alarm condition
Check the logger's status using the PC software
+51 960 810 089
QUICK START GUIDE
Push to start
Sensor
ventas@lazodecontrol.com