Table of Contents
Advertisement
Quick Links
WALL MOUNT RANGE HOOD
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS
FOR RESIDENTIAL & INDOOR USE ONLY
INSTALLATION GUIDE & USER'S MANUAL
www.XtremeAirUsa.com
Pro-X Series: PX01-W30/36
PX02-W30/36
PX06-W30/36/42
PX15-W30/36/42
SP03-W30/36/42
Ultra Series: UL02-W30/36
SU01-W30/36
Deluxe Series: DL02-W30/36
DL03-W30/36
DL06-W30/36
PAGE
1
Advertisement
Table of Contents
Related Manuals for XtreamAIR SU01-W30
Summary of Contents for XtreamAIR SU01-W30
- Page 1 INSTALLATION GUIDE & USER’S MANUAL WALL MOUNT RANGE HOOD Pro-X Series: PX01-W30/36 PX02-W30/36 PX06-W30/36/42 PX15-W30/36/42 SP03-W30/36/42 Ultra Series: UL02-W30/36 SU01-W30/36 Deluxe Series: DL02-W30/36 DL03-W30/36 DL06-W30/36 IMPORTANT: READ AND SAVE THESE INSTRUCTIONS FOR RESIDENTIAL & INDOOR USE ONLY www.XtremeAirUsa.com PAGE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......................... 2 HEIGHT & CLEARANCE ............................3 VENTING REQUIREMENT ............................3 VENTING METHODS ..............................3 ELECTRICAL REQUIREMENT ............................3 TOOLS YOU WILL NEED ............................. 3 PARTS SUPPLIED ..............................4 DIMENSIONS & INSTALLATION OVERVIEW ........................ 5 INSTALLATION ................................. -
Page 3: Height & Clearance
2. HEIGHT & CLEARANCE 3. VENTING REQUIREMENTS IMPORTANT: NEVER exhaust air or terminate ductwork into crawl spaces, between walls, ceiling, attics or garages. All exhaust must be ducted to the outside. Hood mounted too low could result in heat and/or fire hazard. Hoods mounted too high will be hard to reach and will lose its performance and efficiency. -
Page 4: Parts Supplied
7. PARTS SUPPLIED PX02/ PX01/ DL02 DL03 SP03 PART SKETCH CODE DESCRIPTION DL06 PX06 UL02/ PX15 SU01 MANUAL BOOK UPPER/INNER CHIMNEY LOWER/OUTER CHIMNEY CEILING MOUNTING BRACKET BODY MOUNTING ATTACH- ATTACH- ATTACH- ATTACH- ATTACH- ATTACH- BRACKET WALL ANCHOR SCREWS UPPER/INNER CHIMNEY SCREW ATTACHE ATTACHED ATTACHED... -
Page 5: Dimensions & Installation Overview
8. HOOD DIMENSIONS & INSTALLATION OVERVIEW PX02-W30/36, UL02-W30/36 PX01-W30/36 PX06-W30/36/42 PX15-W / / DL02-W / DL03-W / DL06-W / www.XtremeAirUsa.com PAGE... -
Page 6: Installation
9. INSTALLATION STEP 1: (OPTIONAL ONLY) PROTECT THE COOK TOP & CREATE WORK STATION Have 2 pieces 2” x 4” x 20” on both sides of stove & plywood on top of them to protect cook top or stove from damage or debris. This plywood will also create a comfortable work station for easy installation of hood unit. -
Page 7: Baffle Filters Install & Removal
STEP 6: SECURE THE HOOD BODY & TEST RUN A. Use a stud finder to find all studs below the hood body. Put blue tape on every stud found. Use 1/8” drill bit to drill though the back of hood in line with blue tape. Secure the hood body by using the 2.0 inches wood screws (provided) through the back of hood to the stud. - Page 9 F. Remote Control Sensor: Remote control sensor receives infrared (IR) signal from the remote control. The maximum distance for IR data transmission is 10 feet and requires direct line of sight. The transmission distance may vary depending on temperature and remote control battery condition.
-
Page 10: Troubleshooting
12. TROUBLESHOOTING 1. If the range hood or lights does not operate after installation: Check if the range hood has been plugged in. Make sure that all power has been turned back ON. Swap out light assembly to working ones to deter mine whether it is caused by defective bulbs. A.Make sure the range hood is unplugged or turn OFF breaker. -
Page 11: Use & Care Information
13. USE & CARE INFORMATION Operations: Read and understand all instructions and warnings in this manual before operating the appliance. Save these instructions for future reference. Always leave safety grills and filters in place. Without these components, operating blowers could catch on to hair, fingers and loose clothing. ... -
Page 12: Product Warranty
XtremeAIR USA HOOD TEN (10) YEARS MOTOR LIMITED WARRANTY XtremeAIR USA Range Hood (hereunder called “The Company”) warrants its product against defects in material or workmanship for the time periods and as set forth below. **Note: for products purchased after January 2021** Parts: For a period of one (1) year from the original date of purchase of product (“Parts Warranty”), The Company will supply new or equivalent replacement parts in exchange for parts determined to be defective.