Download Print this page
Dover Unified Brands Groen DEE 4/T-40 TA/3 Operator Manual & Service Manual
Dover Unified Brands Groen DEE 4/T-40 TA/3 Operator Manual & Service Manual

Dover Unified Brands Groen DEE 4/T-40 TA/3 Operator Manual & Service Manual

Domestic inclined mixer

Advertisement

Quick Links

OPERATOR MANUAL &
SERVICE MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
This manual provides information for:
MODELS TA/3
INCLINED MIXER
ASSEMBLY
· Stainless Steel
· Tilt-Out Drive System
· Speed Agitator Controls
· For 40, 60 & 80 Gallon Kettles
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
WARNING
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the consignee to inspect the container upon receipt of
same and to determine the possibility of any damage, including concealed dam-
age. Unified Brands suggests that if you are suspicious of damage to make a
notation on the delivery receipt. It will be the responsibility of the consignee to file
a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Unified Brands recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
PART NUMBER 141909, REV. B (7/06)
Domestic
DEE 4/T - (40, 60) TA/3
DHT - (40, 60) TA/3
D - (40, 60) TA/3
1055 Mendell Davis Drive
Jackson, MS 39272
888-994-7636, fax 888-864-7636
groen.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the Unified Brands Groen DEE 4/T-40 TA/3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dover Unified Brands Groen DEE 4/T-40 TA/3

  • Page 1 OPERATOR MANUAL & SERVICE MANUAL IMPORTANT INFORMATION, KEEP FOR OPERATOR This manual provides information for: MODELS TA/3 Domestic INCLINED MIXER ASSEMBLY · Stainless Steel · Tilt-Out Drive System · Speed Agitator Controls · For 40, 60 & 80 Gallon Kettles DEE 4/T - (40, 60) TA/3 DHT - (40, 60) TA/3 D - (40, 60) TA/3...
  • Page 2 OM/TA/3 IMPORTANT — READ FIRST — IMPORTANT TA/3 141909 REV. B...
  • Page 3 WARNING: THE MIXER MUST BE INSTALLED BY PERSONNEL WHO ARE QUALIFIED TO WORK WITH ELECTRICITY, IMPROPER INSTALLATION CAN RESULT IN INJURY TO PERSONNEL AND/OR DAMAGE TO EQUIPMENT. WARNING: ANY MECHANICAL OR ELECTRICAL CHANGE MUST BE APPROVED BY THE GROEN FOOD SERVICE ENGINEERING DEPARTMENT.
  • Page 4 OM/TA/3 WARNING DO NOT PLACE HANDS, TOOLS, OR HOSES IN KETTLE WHILE AGITATOR IS MOVING AGITATOR INSTRUCTIONS *WARNING* AGITATOR AREA MUST BE CLEAR OF OBSTRUCTION BEFORE OPERATION TO RUN AGITATOR ENSURE KETTLE IS FULLY UPRIGHT ENSURE MIXER HEAD IS FULLY DOWN AND LATCHED SET THE SPEED DIAL TO DESIRED SPEED TURN THE START SWITCH TO ON TO STOP AGITATOR...
  • Page 5: Table Of Contents

    OM/TA/3 Table of Contents IMPORTANT OPERATOR WARNINGS ..........2 REFERENCES .
  • Page 6: Equipment Description

    OM/TA/3 Equipment Description The Groen TA/3 assembly is an electrically The secondary, counter rotating agitator is powered mixer with dual counter rotating constructed of stainless steel and is easily agitators, which is incorporated into Groen removeable. kettles of 40 to 80 gallon capacity. The mixer has a variable speed drive with The main agitator is anchor type and of electrical speed control.
  • Page 7 OM/TA/3 WARNING Adequate clearance for tilting TURN OFF AGITATOR BEFORE ADDING INGREDIENTS OR INSPECTING KETTLE Access for service CONTENTS. WEAR LOOSE CLOTHING JEWELRY AROUND Unit fastened down OPERATING MIXER KETTLE. KEEP WELL CLEAR OF ROTATING MIXER ARMS AND Mixer power supply conforms to PADDLES AT ALL TIMES.
  • Page 8: Operation

    OM/TA/3 Operation WARNING TURN OFF AGITATOR BEFORE ADDING INGREDIENTS OR INSPECTING KETTLE CONTENTS. DO NOT WEAR LOOSE CLOTHING OR JEWELRY AROUND OPERATING MIXER KETTLE. KEEP WELL CLEAR OF ROTATING MIXER ARMS AND PADDLES AT ALL TIMES. 1. Before you operate the mixer, make sure that the agitator is firmly connected with the 5.
  • Page 9: Cleaning

    OM/TA/3 Cleaning A. Suggested Tools & Materials. A good stainless steel cleaner. 2. Stiff brush. 3. Sanitizer Solution B. Precautions Photo 2 WARNING BEFORE CLEANING ANY PART OF THE MIXER, OTHER THAN THE AGITATOR, SHUT OFF ALL ELECTRIC POWER TO THE COOKER/MIXER AT THE CIRCUIT BREAKER OR FUSE BOX, TO AVOID POSSIBLE ELECTRIC SHOCK.
  • Page 10 OM/TA/3 agent from your supplier of sanitation CAUTION products. Following the supplier’s directions, WHEN YOU CONNECT THE SCRAPER WITH apply the sanitizer after the agitator has THE YOKE, MAKE SURE THE SCRAPER IS been washed, then rinse off the sanitizer CURVED THE SAME WAY AS THE KETTLE.
  • Page 11: Maintenance

    OM/TA/3 Maintenance B. Component Replacement WARNING USE OF ANY REPLACEMENT PARTS WARNING OTHER THAN THOSE SUPPLIED BY GROEN BEFORE REPLACING ANY PARTS, SHUT OR THEIR AUTHORIZED DISTRIBUTOR OFF ALL ELECTRIC POWER SUPPLIES TO VOIDS ALL WARRANTIES AND CAN CAUSE THE COOKER/MIXER. BODILY INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT.
  • Page 12: Troubleshooting

    OM/TA/3 Troubleshooting Your Groen Mixer will operate smoothly and efficiently if properly maintained. However, the following is a list of checks to make in the event of a problem. If the actions suggested do not solve the problem, call your authorized Groen Service Representative. For the phone number of the nearest agency, check the Groen web site at www.groen.com, ask your area Groen representative or call the Groen Parts and Service Department.
  • Page 13: Parts List

    OM/TA/3 Parts List To order parts, contact your authorized Groen Service Agency. Supply the model designation, part description, part number and quantity required. Where applicable, provide the voltage and phase as well. WARNING USE ONLY GROEN-SUPPLIED PARTS. SUBSTITUTION OF UNAUTHORIZED OR GENERIC PARTS CAN RESULT IN BODILY INJURY TO THE OPERATOR AND DAMAGE TO THE EQUIPMENT.
  • Page 14 OM/TA/3 Parts List Description Part No. Description Part No. Switch Assembly Agitator 128485 Handle & Latch Assy 044392 Switch Assembly Speed Control 115341 Bracket Arm Guide 002124 Switch Assembly Emergency Stop 115342 005474 Pin Taper #4 2" Long Enclosure Nema 128458 009122 Snubber...
  • Page 15 OM/TA/3 Parts List Description Part No. Description Part No. Holder Scraper Blade 001724 010561 Holder Assy Scraper 80 Gal Holder Assy Scraper 60 Gal 010557 Holder Assy Scraper 80 Gal 010563 Clip Hairpin Agitator Secondary 60 Gal 009687 012947 009245 Agitator Primary 80 Gal 009688 Agitator Secondary 80 Gal...
  • Page 16 TA/3 141909 REV. B...
  • Page 17 141909 REV. B TA/3...
  • Page 18 TA/3 141909 REV. B...
  • Page 19 141909 REV. B TA/3...