TP-Link RE205 Quick Installation Manual page 2

Manage the Extender
After setup, you can manage the extender via any of the methods below.
Note: If your extender and router use the same network name, Method 1 is recommended.
Method 1: Via the Tether App
1. Connect your smartphone to the extender's or router's network.
2. Launch the Tether app, select your extender, and log in.
3. Manage the extender as needed.
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the extender's network
using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and
log in.
Note: If the login window does not appear, refer to FAQ > Q1.
3. Manage the extender as needed.
OneMesh with Seamless Roaming
TM
TP-Link OneMesh router and extenders work together to form one unified Wi-Fi
network. Walk through your home and stay connected with the fastest possible
speeds thanks to OneMesh's seamless coverage.
Unified Wi-Fi Network
Router and extenders share the same wireless settings, including network name, password,
access control settings and more.
Seamless Roaming
Devices automatically switch between your router and extenders as you move through your
home for the fastest possible speeds.
Easy Setup and Management
Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the
Tether app or at your router's web management page.
To check full list of TP-Link OneMesh devices, scan the QR code,
or visit https://www.tp-link.com/One-Mesh/compatibility
Q1. What should I do if I cannot access the extender's web
management page?
Make sure your computer or smartphone has connected to the extender's
network, and not that of your router. If your router and extender share the same
network name, connect your computer to the extender via an Ethernet cable, or
use the Tether app.
If you are using a computer, make sure it is set to obtain an IP address and DNS
server address automatically.
Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered
in the web browser and press Enter. Note that http://192.168.0.254 applies only
for extenders with factory default settings.
Use another web browser and try again.
Reboot or reset the extender and try again.
If you are still having problems, contact our technical support.
Q2. What should I do if the Signal LED doesn't turn solid on after
completing setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi passwords for your host networks during
the configuration. Check the passwords and try again.
Make sure the extender is close to your router, preferably within 16 feet, and
away from large electrical appliances.
If you have enabled wireless MAC filtering, wireless access control, or access
control list (ACL) on your router, disable them first, then follow any method on the
front page to complete the configuration.
Try setting up via the WPS button.
Reset the extender and go through the configuration again.
If you are still having problems, contact our technical support.
To ask questions, find answers, and communicate with TP-Link users or engineers,
please visit https://community.tp-link.com to join TP-Link Community.
If you have any suggestions or needs on the product guides, welcome to email
techwriter@tp-link.com.cn.
LED Explanation
If you are
.
LED
Power
Signal
2.4GHz
5GHz
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the RESET button for 1
second. The extender will reboot.
Safety Information
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device.
Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU declaration of
conformity may be found at https://www.tp-link.com/en/ce.
For technical support, the user guide and other information, please
visit https://www.tp-link.com/support, or simply scan the QR code.
Status Indication (For Range Extender Mode)
On/Off
The extender is on or off.
The system is starting up or firmware upgrade is in
Blinking
progress.
The extender is connected to your router's
Solid blue
wireless network and is in a suitable location.
The extender is receiving a weak signal. Try
Solid red
relocating it closer to your router.
Blinking
WPS connection is in progress.
Off
No wireless connection is established.
The extender is connected or not connected to the
On/Off
2.4GHz wireless network of your router.
The extender is connected or not connected to the
On/Off
5GHz wireless network of your router.
RESET