Asus WS X299 PRO Series Manual page 46

Table of Contents

Advertisement

14.
Power Supply SMBus connector (5-pin PSUSMB1)
This connector allows you to connect SMBus (System Management Bus) to the PSU
(power supply unit) to read PSU information. Devices communicate with an SMBus
host and/or other SMBus devices using the SMBus interface.
This connector functions only when you enable the ASUS ASMB9.
Power supply is required to meet PMBus specification and customized BMC FW may be
needed. Please contact ASUS if your need further support
15.
Serial port connector (10-1 pin COM1)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
The COM module is purchased separately.
1-28
Chapter 1: Product Introduction

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ws x299 proWs x299 pro/se

Table of Contents