3.
Location LED (LOCLED2)
This onboard LED lights up when the Location button on the server is pressed or when
triggered by a system management software. The Location LED helps visually locate
and quickly identify the server in error on a server rack.
4.
Q-Code LEDs
The Q-Code LED design provides you with a 2-digit error code that displays the system
status.
•
•
1-16
The Q-Code LEDs provide the most probable cause of an error code as a starting
point for troubleshooting. The actual cause may vary from case to case.
Please refer to the Q-Code table in the Appendix section for more details.
Chapter 1: Product Introduction