Captron CML1 Original Operating Instructions page 12

Assembly
Requirements: Mounting surface is level and
clean.
► Disconnect the system from its voltage
supply and secure it against being
switched on again.
► Set the desired position of the indicator
light and drill the hole according to the
drilling pattern.
► Unscrew the lock nuts (B) from the
indicator light (A).
► Insert the indicator light into the prepared
hole and screw the lock nuts (B) back
on.
► Position the indicator light (A) and
tighten the lock nuts with max. 1 Nm.
Connect CML1
Different colors are shown depending on CML1 actuation.