Advertisement
Quick Links
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
FRONT RUNNER CAN NOT RECOMMEND A MAXIMUM LOAD CARRYING CAPACITY. PLEASE REFER TO YOUR VEHICLE MANUFACTURER'S RECOMMENDATIONS. IT IS CRITICAL
THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN
AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS
TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU
MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU
DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE
INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
LAMG001_REV_A01
Ladder
Mercedes Gelandewagen G Class
READ ME !
Thank you for purchasing a Front Runner Mercedes Gelandewagen G Class Ladder.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
1
© COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS
ENG
LAMG001
Advertisement
Related Manuals for Front Runner LAMG001
Summary of Contents for Front Runner LAMG001
- Page 1 TO YOUR VEHICLE. CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
-
Page 2: Tools Needed
IN THE BOX TOOLS NEEDED Ladder Bottom Clamp R Top Clamp R M6 x 19 x 1SS Flat Washer 10MM M6 Spring Washer M6 x 60 Socket Head Pinch Weld 100mm FIGURE 1.1 LAMG001_REV_A01 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS... - Page 3 FIT AND SECURE Depending to which side the vehicle's back door opens, you may need to change the top clamps of the ladder. Do this by loosening the factory installed M6 Button head bolts as shown and secure 10MM Clamps "marked R" (Items 2 & 3) as shown. You will also need to relocate the Stopper Plate to the opposite side as shown.
- Page 4 After you have cleaned the surface, remove the protective strip and secure the bottom of the Ladder to the vehicle by firmly pushing it down. Make sure the spacing is still 70mm from the side of the door. LAMG001_REV_A01 © COPYRIGHT 2016 FRONT RUNNER VEHICLE OUTFITTERS...
- Page 5 Congratulations! You did it. Take a step back and admire your work! Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions. Please call us if you have any questions about the installation of this product.