Page 1
GM710A-YF A/C Service Station GM710A-YF LCH-AC944 A/C Service Station Canada Auto Solutions Inc. 1115 Crestlawn Drive Mississauga Ontario Canada 905-602-0226...
Page 2
GM710A-YF A/C Service Station Safety The machine is designed to be used and repaired by qualified personnel only. The machine designed for use in recovering the R12, R134a or R1234yf refrigerant fluid used in the air-conditioning (A/C) systems of motor vehicles. Fill the A/C system with the quantity of refrigerant recommended by the manufacturer.
GM710A-YF A/C Service Station 1、Introduction 1) Outline AMC series A/C system maintenance equipment is with the latest design technology which utilizes the best control principles and the manufacturing process. AMC-180AN-YF A/C Service Station is intelligent equipment collecting of the A/C recovery, recycling, recharging and other functions in one.
GM710A-YF A/C Service Station 3. Operation 1) Parts descriptions HP gauge Displayer LP gauge Operation panel P gauge HP port Auxiliary Port LP port Switch for Service Port for Switch for new oil adding Dry-filter used oil discharge Used oil bottle New oil bottle...
GM710A-YF A/C Service Station 2) First use A、 Open the back door and unscrew the electronic scale support screw before using the equipment. And also take out all of the Protective filler. Unscrew support screw. From the back. B、 Please supply about 3 kg refrigerant into the tank of equipment so that all of the functions can be run normally. Please refer to the chapter of “Refrigerant supply”.
GM710A-YF A/C Service Station C、 If it displays code as F00- during the process, please deal with it according to prompt information. D、 Notice: The used oil can be drained out automatically or manually. “ ” or “ ” keys Note: Press in recovery function.
GM710A-YF A/C Service Station Press Note: In the recharging process, if shows the menu, it means that you B、 ENTER need to turn on the car air-conditioning to complete the recharging process. Later, you should supply new refrigerant into the tank. 9) Auto.
GM710A-YF A/C Service Station A- Usage of the Auxiliary Port Recharging from cans a) Before vacuum, connect the pipe with the external tank to the auxiliary port. Note: the connector to the auxiliary port must be with thimble. Do not open the valve of external tank during this process.
GM710A-YF A/C Service Station Please read the ID of the dry-filter at the label. Which is the value followed by letter SN. Please attention the mounting direction of the dry-filter. F-Change vacuum pump oil A、 When the pump oil became cream or the unit displays maintenance message, the vacuum pump oil must be changed.
Page 13
GM710A-YF A/C Service Station All rights reserved. V2020...