Advertisement
o.
WPA Pre-Shared Key: This is the 5 GHz radio Wi-Fi password. It must be between 8 and 63
characters long. (Default is Gigawave)
p.
Network Key Rotation Interval: This specifies the interval (seconds) after which a WPA
group key is changed. (Can be left at 3600).
q.
TX Power Adjustment (%): Set the 5 GHz radios antenna power. This can be raised or low-
ered based on the scenario. If there is a lot of interference from wireless devices the output power
can lowered accordingly. (Default is set to 100).
r.
Region Code: Different regions have different regulations for Wi-Fi channels, adjust
according to the region that the router is installed in. (Default is Europe channels 36, 40, 44, 48).
General users usually only need to change the SSID and Password (WPA Pre-Shared Key) to suit
client's needs. See pics below:
More advanced users can also click on the GuestAp tab next to General and enable a guest AP
network. A guest Wi-Fi SSID and Password (WPA Pre-Shared Key) can be enabled from here. It can
be scheduled and isolated from the main LAN network. With this option guests clients will not be
able to see LAN device on the main LAN network. Advanced users also have Bridge, Wireless MAC
Filter, RADIUS Settings and Professional settings. Settings in these tabs are outside the scope of
this basic user guide.
Manual - 4G router setup
8
www.gigawavewifi.com
Advertisement
