Advertisement
3.
More advanced feature such as IP routing, Bandwidth control per LAN port and
Wake-on-Lan (wake up powered down LAN devices connected to the router) can be configured
from the Route, Ethernet-Switch and Wake-On-Lan tabs. These advanced features are outside the
scope of this manual.
E - Configuring the routers WAN
Settings
Several different connection types can be selected when connecting the router to the WAN.
Addresses can be manually or automatically assigned. By default, the router is set to IPoE, when on
this setting the router will automatically connect to the ISP. This page can be left as default unless
user has specific IP addresses provided by the ISP to configure the router.
The following are some advance WAN settings that may be used by a typical user:
Port Forwarding
This allows remote computers on the wan connect to a specific device or service within the LAN
network. Port forwarding for CCTV etc should be configured here by setting the port forwarding
rules.
www.gigawavewifi.com
Manual - 4G router setup
10
Advertisement
