Table of Contents
Advertisement
Herewith we declare that the air movement equipment designated below, on the basis of its design and construction, in the
Manufacturer
Woods Air Movement
Herewith we declare that the air movement equipment designated below, on the basis of its design and construction, in the
form brought on to the market by us, is in accordance with the relevant health and safety requirements of the EC Council
Axial Way
form brought on to the market by us, is in accordance with the relevant health and safety requirements of the EC Council
directives on Machinery and Electromagnetic Compatibility. If alterations are made to the machinery without prior
GB-Colchester CO4 5ZD
directives on Machinery and Electromagnetic Compatibility. If alterations are made to the machinery without prior
consultations with us, this declaration becomes invalid. We further declare that the equipment identified below may be
consultations with us, this declaration becomes invalid. We further declare that the equipment identified below may be
intended to be assembled with other equipment/machines to constitute machinery, which shall not be put into service until
intended to be assembled with other equipment/machines to constitute machinery, which shall not be put into service until
the assembled machinery has been declared in conformity with the provisions of these EC Council directives.
Herewith we declare that the incomplete machine
the assembled machinery has been declared in conformity with the provisions of these EC Council directives.
Designation of equipment:
Designation of equipment:
Designation of the machine:
Series / type:
Series / type:
Fläkt Woods Limited order no:
HT Roof fan
Fläkt Woods Limited order no:
Relevant EC Council directives:
Relevant EC Council directives:
meets the basic requirements of the guideline 2006/42/EC, in particular:
Artical 1.1.2, 1.1.5, 1.3.2, 1.4.1, 1.5.1, 1.7.3
Applied harmonized standards
Applied harmonized standards
in particular (2):
Furthermore, in accordance with the requirements of the following directives:
in particular (2):
Applied national standards
Applied national standards
and technical specifications
Low voltage directive (2014/35/EU)
and technical specifications
in particular (3):
EMC-Directive (2014/30/EU)
in particular (3):
Basis of self attestation:
ErP-Directive (2009/125/EC)
Basis of self attestation:
Technical file compiled by:
The following harmonized standards were applied:
Technical file compiled by:
Signed for and on behalf of the
EN60204-1
Signed for and on behalf of the
manufacturer by:
manufacturer by:
EN61800-5-1
Position of signatory:
Moreover, we declare that the relevant technical documentation according to Appendix VII, Part B, has been
Position of signatory:
issued, and we commit ourselves to forwarding the documents on request to the market regulators as written
documents, or electronically.
The commissioning of the incomplete machine is prohibited until the incomplete machine has been installed in a machine
which then meets the requirements of the EC Machinery Directive 2006/42/EC.
Notes:
Name of representative for documentation:
Notes:
(1)
Fläkt Woods fans are driven by AC induction motors which are inherently compliant if supplied with a truly sinusoidal AC supply.
Where the fan motor is supplied via an inverter or other electronic control, verification of its compatibility together with cabling should be
(1)
Fläkt Woods fans are driven by AC induction motors which are inherently compliant if supplied with a truly sinusoidal AC supply.
Address of the nominated Person:
sought from the control supplier.
Where the fan motor is supplied via an inverter or other electronic control, verification of its compatibility together with cabling should be
sought from the control supplier.
(2)
For a complete list of applied standards and technical specifications see Fläkt Woods documentation.
EC-declaration of Incorporation was issued:
(2)
For a complete list of applied standards and technical specifications see Fläkt Woods documentation.
(3)
Where no relevant harmonised standards exist.
(3)
Where no relevant harmonised standards exist.
Colchester, 10.10.2019
Place, Date
Fläkt Woods Limited t/a Woods Air Movement
Fläkt Woods Limited t/a Woods Air Movement
Axial Way
Colchester CO4 5ZD
Axial Way
United Kingdom
Colchester CO4 5ZD
Tel: +44 (0) 1206 222555
United Kingdom
Email:
info.uk@flaktgroup.com
Tel: +44 (0) 1206 222555
Website:
www.flaktgroup.com
Email:
info.uk@flaktgroup.com
Website:
www.flaktgroup.com
12
Model or type of machine:
Axial Fans
Axial Fans
HTC
Machinery Directive (2006/42/EC).
Machinery Directive (2006/42/EC).
Electromagnetic Compatibility Directive (2014/30/EU) where applicable (1)
Electromagnetic Compatibility Directive (2014/30/EU) where applicable (1)
Guideline number: 327/2011 (EU) where applicable
Guideline number: 327/2011 (EU) where applicable
Guideline number: 1253/2014 (EU) where applicable
Guideline number: 1253/2014 (EU) where applicable
EN ISO 12100:2010, EN 60204-1:2018, EN ISO 12499:2008, EN ISO 5136:2010
EN ISO 12100:2010, EN 60204-1:2018, EN ISO 12499:2008, EN ISO 5136:2010
EN ISO 5801:2017, EN ISO 13350:2015, EN IEC 61000-6-2:2019, EN 61000-6-1:2007
EN ISO 5801:2017, EN ISO 13350:2015, EN IEC 61000-6-2:2019, EN 61000-6-1:2007
EN 61000-6-3:2007/A1:2011/AC:2012, EN 61000-6-4:2007/A1:2011
EN 61000-6-3:2007/A1:2011/AC:2012, EN 61000-6-4:2007/A1:2011
BS 848.2-1:2004 (BS ISO 13347-1:2004/A1:2010)
BS 848.2-1:2004 (BS ISO 13347-1:2004/A1:2010)
BS 848.6:2003 (BS ISO 14695:2003)
BS 848.6:2003 (BS ISO 14695:2003)
BS 848.7:2003 (ISO 14694:2003/A1:2011)
BS 848.7:2003 (ISO 14694:2003/A1:2011)
Quality Assurance to BS EN ISO 9001:2015
Quality Assurance to BS EN ISO 9001:2015
BSI Reg Firm Cert No. FM 155.
BSI Reg Firm Cert No. FM 155.
Iain Kinghorn
Iain Kinghorn
Axial Way, Colchester, CO4 5ZD, United Kingdom
Axial Way, Colchester, CO4 5ZD, United Kingdom
EN60034-1
EN12101-3
Steve Chesney
Steve Chesney
Managing Director
Managing Director
Registered in England no. 233771
Registered office: Axial Way, Colchester, CO4 5ZD, United Kingdom
Registered in England no. 233771
Registered office: Axial Way, Colchester, CO4 5ZD, United Kingdom
© Fläkt Woods Limited September 2021
© Fläkt Woods Limited September 2021
EC-declaration of Incorporation
AsdefinedbytheEC-MachineryDirective2006/42/EC
EC Declaration of Conformity
EC Declaration of Conformity
EN61000-6-2
see manufactures address
R&D Director Woods Air Movement
Since year of manufacture:
2019
EN61000-6-3
Place: Colchester
Place: Colchester
Date: 25/09/2021
Date: 25/09/2021
Simon Chapman
Advertisement
Table of Contents
