Connect Accessory Devices; Dvd Player/Recorder To Tv - Magnavox 50ML6200D User Manual

Connect Accessory Devices

1 Set Top Box to TV
Pb
Y
R
VIDEO
DVD Player or DVD Recorder to TV
2
Pb Y
HDMI
R
VIDEO
DVD Player or DVD Recorder to TV
3
CABLE/
ANTENNA
HDMI
CABLE/
ANTENNA
COMP VIDEO S-VIDEO VIDEO AUDIO
Y Pb R
OUT OUT OUT
Pr
L
Using HDMI
A
Connect RF cable from wall to input at back of the cable box.
B
Connect cable box to TV using HDMI cable.
Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to
connect to the HDMI connector. You need to also connect the audio cable to L and R
AUDIO jacks. Next, go to Menu=>Setup=>Source=>Analog Audio In=> and
select HDMI.
C Press AV button to select HDMI external channel.
Using RF Cable
A Connect RF cable from wall to input at the back of the cable box.
B
Use second RF cable to connect the cable box to the TV's antenna input.
This connection gives mono sound. For stereo sound use also composite
audio/video connection (Refer to panel 3).
Set output switch on set-top box to CH 3 or 4 (if available) and tune TV to the
same channel as the set top box channel.
In some cases, cable box will automatically tune to channel 3 or 4. Just change channels
on the set top box to view the program.
Using HDMI
Connect DVD player/DVD recorder to the TV using HDMI cable.
A
Turn on TV and DVD Player/DVD recorder. Press AV button on remote
B
control to tune to the video supplied by HDMI.
Insert a prerecorded DVD into DVD player/DVD recorder and press PLAY
to verify correct connection.
Using Component Video Input (YPbPr)
Insert Component Video connectors into their corresponding jacks on both
A
DVD player/DVD recorder and TV (Y, Pb and Pr).
B
Connect red/white audio cables into the audio output jacks on DVD player/
DVD recorder and audio AV inputs on TV.
C
Turn on TV and DVD player/DVD recorder. Press AV on remote control
until the connected source appears on TV screen.
Insert a pre-recorded DVD into DVD player/DVD recorder and press PLAY to verify
correct connection.
21