Advertisement
USER INSTRUCTIONS
b) Charging with 12 V cable:
•
Plug in the adapter of the cable in the 12 V socket in your car. Red
indicator light on the adapter shows when the battery is charging. On
the LED panel, a blinking blue light on the right side indicates that the
battery is charging.
•
Please only use the original cable supplied with the light for charging
the battery!
•
Please do not turn on the light while charging!
•
If the original cable supplied with the light or its adapter is injured, do
not use it for charging!
c) Charging with the solar panel:
•
Please pay attention to keep the solar panel
clean. Please follow "Cleaning instructions"
below for cleaning your light!
•
In case of sunny weather, you can charge
your light outdoors, as well as indoors with
the solar panel well-positioned, if you have
direct sunlight coming through a window.
The blue indicator light on the right side of
the LED panel keeps blinking until the solar
panel receives enough light for charging.
Once the indicator light stops blinking, it means the solar panel does
not receive sufficient light to charge the battery.
•
In order to maximize the efficiency of solar charging, please rotate the
light to approximately 45 degrees with the solar panel facing towards
the sun.
•
Keep the light outdoors only for solar-charging! Once you finished
charging, or sufficient sunlight is not provided anymore, and you do
not intend to use your light, please store the light switched off indoors
in a dry place between 10 - 30 Celsius.
3. Charging and using the light in cold weather
•
Do not store the light below 0 Celsius!
•
If you intend to charge your light by solar energy when the outdoor
temperature is below 10 Celsius, please only keep your light outdoors
for charging! When you finished charging, or there is no sufficient
solar light for charging anymore, please take your light indoors.
6
•
Overcast, cloudy, rainy weather below 10 Celsius temperature are
not ideal conditions for solar charging, please choose USB charging
in this case.
•
You can use your light at temperatures below 0 Celsius. It is
recommended to full-charge your light by USB before use.
4. Storing the light when it is out of use
Please store your light switched OFF between 10-30 Celsius in a dry
place indoors. Please keep always follow the instructions described in
Chapter 1!
5. Assembling the light
•
Please take out the light, the stand, and the package with the screw and
washers from the box.
•
Place the stand on a stable, horizontal surface.
•
Move the black console of the light into a low position.
•
Place a washer on the screw-hole located in the middle of the stand.
•
Place the light carefully on the washer in a way that the central circular
hole of the console should be right exactly on the top of the washer.
•
Place the second washer on the central circular hole of the console.
•
Drive in the screw.
6. Functions of the light, user's instructions
Using the ON/OFF button:
•
The ON/OFF button is located on the bottom of the shell. Once you
finished charging, you can start using your light.
•
The light shines at full power (considering full battery charge) with white
color, if you switch the ON/OFF button in the left direction (option II).
•
Switching the ON/OFF button to central position turns off the light.
•
You can activate the emergency red-blue blinking mode (option I) by
switching the ON/OFF button in the right direction.
Adjustment of the light head:
The light can be rotated in vertical direction. The force needed for the
rotation of the light head is adjustable by driving the 2 screws located on
the side of the light (where the console is attached to the light) stiffer or
looser by the allen key supplied for the light.
The light can be rotated horizontally in 360 degrees on the stand.
USER INSTRUCTIONS
7
Advertisement
