SHOWTEC Galactic 1K20 TXT Manual page 32

Galactic 1K20 TXT
Channel 3 – Text Movement Speed
0-255 From fast to slow (only if Flow effect has been added to the currently active text)
Channel 3 – Patterns
Choose your preferred pattern by adjusting the value of Channel 3. Subsequently, adjust the value of
Channel 2 to gain access to secondary patterns.
For the full pattern chart, see page 33.
Channel 4 – Color
0-7 Default colors
8-15 Red
16-23 Green
24-31 Yellow
32-39 Blue
40-47 Purple
48-55 Cyan
56-63 White
64-111 Color switch 1, from slow to fast
112-159 Color switch 2, from slow to fast
160-207 Color flow, from slow to fast
208-255 Strobe, from low to high frequency
Channel 5 – Gradual pattern drawing
0 Off
1-127 Manual pattern drawing
128-255 Automatic pattern drawing, from slow to fast
Channel 6 – Zoom
0-127 Gradual zoom adjustment, from big to small
128-169 Zoom out
170-209 Zoom in
210-255 Zoom in/zoom out
Channel 7 – Zoom speed
0-255 Zoom speed adjustment, from fast to slow
Channel 8 – Y-axis rotation
0-127 Gradual Y-axis rotation adjustment
128-191 Clockwise rotation
192-255 Counterclockwise rotation
Channel 9 – Y-axis rotation speed
CH1 must be set between 100-149, CH8 must be set between 128-255
0-255 Y-axis rotation speed, from fast to slow
Channel 10 – X-axis rotation
0-127 Gradual X-axis rotation adjustment
128-191 Clockwise rotation
192-255 Counterclockwise rotation
Ordercode: 51344
CH1 must be set between 100-149
When CH1 is set between 150-199 or 200-255,
CH2 and CH3 are connected to each other
CH1 must be set between 100-149
CH1 must be set between 100-149
CH1 must be set between 100-149
CH1 must be set between 100-149, CH6 must be set between 128-255
CH1 must be set between 100-149
CH1 must be set between 100-149
31