Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec SDS-6 12V DC 1A power adapter (1,5 m) ...
For adult use only. Device must be installed out of the reach of children. Never leave the unit running unattended. The user is responsible for correct positioning and operating of the SDS-6. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device. ...
SDS-6 Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK...
SDS-6 Description of the device Features The SDS-6 is a compact light controller equipped with very useful features: • 6-channel fixture control • Master dimmer fader • DMX-512: 3-pin female XLR OUT • Power supply: 12V DC 1A power adapter (included) •...
SDS-6 Installation Remove all packing materials from the SDS-6. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electric mains power supply before cleaning or servicing.
04) If all of the above appears to be O.K., plug the unit in again. 05) If nothing happens after 30 seconds, unplug the device. 06) If you are unable to determine the cause of the problem, do not open the SDS-6, as this may damage the unit and the warranty will become void.