Table of Contents
Advertisement
TURN ON THE APPLIANCE AND SELECT PROGRAMME
Turn on the appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one (see the section entitled
Loading the Dishwasher ).
2. Pour in the detergent (see the section entitled Salt, Detergent and Rinse Aid ).
3. Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification
of the socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4. Open the door, press the ON/OFF Button, and the ON/OFF light will turn on.
5. Press the program Button, the wash program will be changed as follows direction:
ECO->90 Min->Rapid->Intensive->;
If a program is selected, the response light will light. Then close the door, the dishwasher
begins to start.
19
Advertisement
Table of Contents
