Summary of Contents for Pet Gear DELUXE SOFT STEP 4
Page 1
For The ON-THE-GO Pet ™ INSTRUCTION MANUAL DELUXE SOFT STEP 4 PG9740SOC To see our full line of products, visit us online at: www.petgearinc.com CUSTOMER SERVICE HELP DESK customerservice@petgearinc.com Toll-Free 877-752-9123 - Eastern Standard Time 8am-3pm, Monday through Friday...
Check that you have all the parts shown BEFORE assembling your product. If any parts are missing, call Customer Service. Right Panel Left Panel Risers Dowels Top Stair with Straight Edge Middle and Bottom Stairs with Curved Side Deluxe Soft Step Cover DELUXE SOFT STEP 4 • PG9740SOC...
Page 3
Step 1 With rubber grippers on the bottom, place right panel, part (B) on floor with PET GEAR Logo facing the floor and insert top stair, part (E). Keep the STRAIGHT EDGE toward the back and rug facing the top. Make sure there are no gaps between parts after inserted.
Page 4
Insert riser, part (C). Make sure there are no gaps between parts after inserting. Step 7 Insert bottom stair, part (F). Note the CURVED SIDE direction. Make sure there are no gaps between parts after inserting. Curved Side DELUXE SOFT STEP 4 • PG9740SOC...
Page 5
Insert dowels, part (D). Make sure there are no gaps between parts after inserting. Step 10 Attach left panel, part (A). Align all holes before pushing panel down. Make sure there are no gaps between parts after inserting. DELUXE SOFT STEP 4 • PG9740SOC...
Page 6
ASSEMBLY INSTRUCTIONS Step 11 Place deluxe soft step cover, part (G), over steps with the zipper in the back of the steps. Step 12 Pull the zipper down to close. DELUXE SOFT STEP 4 • PG9740SOC...
Not intended to be used as a restraining device for aggressive or dangerous animals that dig, chew or paw aggressively. Do not leave your pet unattended. PET GEAR is not liable for any damage caused by aggressive, destructive, immature or untrained animals. Do not use near an open or exposed flame. Failure to follow these warnings and the instructions could result in serious injury or death.