Maintenance And Storage - Feider FBA20U2 Original Instructions Manual

20v 2ah(4ah) lithium-ion battery
Table of Contents

Advertisement

To ensure that the battery pack provides long service, you should take care to recharge it promptly. You must
recharge the battery pack when you notice that the power of the cordless vacuum drops. Never allow the battery
pack to become fully discharged. This will cause it to develop a defect.
5.2 Battery capacity indicator
Press the switch for the battery capacity indicator . The battery capacity indicator shows the charge status of the
battery using 4 LEDs as following:
All 4 LEDs are lit:
The battery is fully charged.
3 LED(s) are lit:
The battery has approx 75% remaining charge.
2 LED(s) are lit:
The battery has approx 50% remaining charge.
1 LED is lit:
The battery will be empty soon, please recharge the battery.
5.3 Charger indicator
Indicator status

6.MAINTENANCE AND STORAGE

MAINTENANCE
The batteries have been designed to provide maximum trouble-free life. However, like all batteries, they will
eventually wear out. DO NOT disassemble battery pack and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewellery, could result in serious burns.
To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged
and ready for use.
Ready for use
The charger is connected to the mains and is ready for use; there is
no battery pack in the charger.
Charging
The charger is charging the battery pack in charge mode.
Battery pack is full of charge.
Charging is finished and battery pack in the charger.
The temperature of battery is too high or too low, the charger is
under protection status. The charging function can be recovered
after the temperature is normal.
Unrecoverable battery malfunction.
Explanations and actions
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fba20u4

Table of Contents