First Time Installation - Philips 42PF9531 User Manual

2560.5 en 14-11-2006
Please select your
language.....
PHILIPS
using cursor up and
down
Next
PHILIPS Installation
This will help you to install the following
sections:
Television
Settings assistant
Previous Next
PHILIPS Television
System searching: please wait..........
Stop
14:12 Pagina 9

First time installation

The first time (and only the first time) you switch on your TV,
you see a Welcome screen followed by the installation
procedure.
The installation procedure consists of a series of screens that
will guide you through the installation of your TV.
Follow the instructions on screen.
Note: if the TV has already been installed before and/or you
want to change the First time installation settings, proceed
with Use of the TV menu settings, p. 12.
a
Step 1: select your on-screen language
After the Welcome screen you are asked to select a language of
the TV's on-screen menus.The text of the header and the info
on screen continuously change language.
1. Press the cursor up/down to highlight your language.
2. Press the
3. Follow the instructions on screen to proceed.
Menu language
English
Français Step 2: complete the initial TV installation
procedure
Chinese
Arabic
1. Press the green colour key on your remote control when
.............
Television is highlighted.
2. Press the green colour key on your remote control to start
the Automatic channel installation.
> All available TV channels are searched for and stored
Note: if you choose to install the channels at a later time,
select the Automatic installation in the TV menu,
Installation, Channels, p. 25, to scan available channels.
3. Press the red colour key when the search is completed.
Skip Stop
OK key on the remote control.
automatically.This will take a few minutes.
EN
9