Table of Contents
Advertisement
3.3
Remote control batteries
‡ Open the battery cover on the back of the
remote control.
® Insert the 2 batteries supplied (Type AAA-
LR03-1,5V). Make sure the + and - ends of the
batteries line up correctly (inside of case is
marked.)
Ò Close the cover.
rNote
Remove the batteries if you do not use the remote
control for a long time.
3.4
Antenna cable
‡ Locate the antenna connection at the back of
the TV.
® Insert the antenna cable tightly into the
Antenna x socket.
Your TV
3.5
Power cable
Keep the mains plug at the wall socket accessible at
all time.
The TV is never powered off completely and
consumes energy unless the mains cord is physically
unplugged.
Although this TV has a very low standby power
consumption, unplug the mains cord if you do not
use the TV for a long time to save energy.
‡ Verify that your mains voltage corresponds with
the voltage printed on the sticker at the back of
the TV. Do not insert the mains cord if the
voltage is different.
® Insert the mains cord tightly.
3.6
First time installation
The first time the mains cord is inserted, the
installation starts up automatically. Follow the
instructions on screen.
à Tips
• If you have selected a wrong language, press the
red key.
• To rearrange the stored channels after the
installation is finished, see section 6.3 Rearrange
stored channels.
7
Advertisement
Table of Contents
