Samsung MIM-H14UN User & Installation Manual page 9

c Arrange the wiring so that it is placed under
the back cover when the cover is in place.
d Tidy up the WIRE of the Wi-Fi Kit Single along
the inside of the panel.
e Attach the back cover.
CAUTION
• The WIRE may get damaged if it is pinched
between the back cover and the panel main
body when attaching the back cover. Exercise
caution to ensure that the WIRE is not pinched.
• When attaching the back cover, fix the panel
insulation to the original position.
3 Attach the panel to the indoor unit.
(For details on how to attach the panel, refer to
the panel installation manual.)
4 Open the electric unit cover on the indoor unit,
and connect the WIRE of the Wi-Fi Kit Single to
the 'WIFI' connector (yellow, 5-pin) at the top
right.
Connect the WIRE of Wi-Fi Kit Single here
5 Close the electric unit cover on the indoor unit.
6 Attach the SmartThings sticker to the spot
Wi-Fi Kit Single
Back cover
Electrical wiring
specified in the figure below.
a Remove the back film from the sticker, and
then attach the label at the specified spot.
b Remove the front film while pressing down
on the sticker.
English 9