DESCRIPTION
The EV4000DS-00C is an evaluation board for
the MP4000. The EV4000DS-00C is a high
efficiency step-down converter designed for
driving high brightness Light Emitting Diodes
(LEDs).
The EV4000DS-00C can supply a maximum
output current of 350mA to drive 10 to 40V LED
strings from a wide input voltage 180 to
260VAC with 50/60Hz.
ELECTRICAL SPECIFICATION
Parameter
Symbol
Input Voltage
Output Voltage
Output Current
EV4000DS-00C EVALUATION BOARD
EV4000DS-00C Rev.1.0
10/25/2019
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
Value
Units
180 – 260
VAC
V
10 – 40
V
V
OUT
mA
I
350
OUT
FRONT
(L x W x H) 2.4" x 1.2" x 0.5"
Board Number
EV4000DS-00C
www.MonolithicPower.com
© 2019 MPS. All Rights Reserved.
EV4000DS-00C
350mA Off-Line WLED Driver
Evalvation Board For 180-260VAC Input
FEATURES
• Constant-current LED Driver
• Power MOSFET Zero-Current Turn On
• High Efficiency and Reliability in Boundary
Mode Operation
• Low 0.9mA Operation Current
• PWM or DC Input Burst Dimming Control
• Hiccup Short Circuit Protection
• UVLO, Thermal Shutdown
• Maximum Frequency is Limited to 110kHz
• Available in SOIC8 Package
APPLICATIONS
DC/DC or AC/DC LED Driver Application
General Illumination
Industrial LED Lighting
LED Light
For MPS green status, please visit MPS website under Quality Assurance.
"MPS" and "The Future of Analog IC Technology", are Registered
Trademarks of Monolithic Power Systems, Inc.
Warning: Although this board is designed to satisfy safety
requirements, the engineering prototype has not been agency
approved. Therefore, all testing should be performed using an
isolation transformer to provide the AC input to the prototype
board.
BACK
MPS IC Number
MP4000DS
1