Magnavox 42MF231D Software Update page 3

Software history:
R23 version:
To solve following issue.
• Double channel number in channel list. It happens in digital TV channel. When there is
digital channel in the last channel, e.g. 65 antenna. If we press RC OK key to display
channel list table and move cursor to select 65, we sometimes can find there are double
channel 65 in channel list.
R21 version:
To solve following issues.
• If the Autoprogram function is performed without an antenna connected, then an antenna
is connected, the Autoprogram function does not load any channels.
• TV menu displays by itself intermittently or constantly.
• 'Software upgrade' message appears on the television screen.
• After power on, digital channel '10.10' displayed on the upper right screen. Cannot change
to any other channel, neither to do auto programming. Just stuck at channel 10.10. Even
the same after power off and then power on.
To add software detection function on HDMI audio source as follows.
• When selecting HDMI source, the audio output of HDMI source is from either HDMI or
AV1. (Software could detect automatically the audio source on HDMI and AV1 and HDMI
has higher priority than AV1)
R18 version:
To solve following issue.
• When using satellite boxes or a DVD / VCR device with RF coax and Composite video
and audio connection to the TV, the audio is not present or goes away.
2