Table of Contents
Advertisement
5. Power On/Off
Press and hold the End / On-Off button to turn the unit on or
off.
1. If a SIM card is not inserted, it is defective or not fit correctly,
a warning message will be displayed after switching on the
display. Turn off your readiness and make sure the SIM card
is inserted correctly.
2. If you insert the SIM card into the device, the PIN request
and the phone password are active, the device prompts you
for the password and PIN code then switches to standby
mode.
After switching on, the phone automatically searches for the
network. If the device has found the allowed network, it will
display its name and signal strength.
If your device does not find a suitable network, you can only
make an emergency call or access non-network services on
your phone
6. Call functions
If you have completed the steps in the previous chapter, the
machine is ready to make and receive calls. For more
information about call origination and basic call functions,
see this chapter.
Note:
If you are using a headset, gently insert and unplug the jack
plug to avoid possible injury.
12
Advertisement
Table of Contents
