Advertisement
Always choose a safe location for the fan, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable
appliance.
WARNING:
at least 1 metre from the front,
sides and rear of the appliance
Fan control switch
The control switch positions are:
•
0 = Off
•
1 = Low speed
•
2 = Medium Speed
•
3 = High Speed
Place the fan on a dry, level and sturdy
surface.
Plug the power cord into the socket,
making sure the speed control is in the off
position.
To operate the fan, turn speed control dial
clockwise until desired wind speed is
achieved.
Adjust tilt by turning neck piece assembly
(9) and tilting body to the desired wind
direction (i.e. Either upward or downward).
To activate the oscillation function, push
down the oscillation pin (7) on the top of
the motor. The fan will then oscillate until
the pin is pulled back up.
IMPORTANT!
NEVER
APPLIANCE!
Operating your Fan
Keep all objects
COVER
THIS
Advertisement
