Toro 30874 Operator's Manual page 20

Protected Menus
There are 5 operating configuration settings that are
adjustable within the Settings Menu of the InfoCenter: auto
idle, maximum mowing ground speed, maximum transport
ground speed, Smart Power, and deck counter balance. These
settings are in the Protected Menu.
Accessing the Protected Menu Settings
1. From the Main Menu, scroll down to the Settings
Menu and press the right button.
2. In the Settings Menu, scroll down to the Protected
Menu and press the right button.
3. To enter the passcode, use the center button to set
the first digit then press the right button to move on
to the next digit.
4. Use the center button to set the second digit then press
the right button to move on to the next digit.
5. Use the center button to set the third digit then press
the right button to move on to the next digit.
6. Use the center button to set the fourth digit then press
the right button.
7. Press the middle button to enter the code.
You can change the ability to view and change the settings in
the Protected Menu. Go to the Protected Menu and scroll
down to Protect Settings. Using the right button, changing
Protect Settings to the O
FF
change the settings in the Protected Menu without entering
the passcode. Changing Protect Settings to the O
hides the protected options and requires entering a passcode
to change the setting in the Protected Menu. After you have
set the passcode, you must turn the key to the O
and then to the O position to enable and save this feature.
N
Viewing and Changing the Protected Menu Settings
1. In the Protected Menu, scroll down to Protect Settings.
2. To view and change the settings without entering a
passcode, use the right button to change the Protect
Settings to O .
FF
3. To view and change the settings with a passcode, use
the left button to select O
turn the key to the O
position.
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle time
between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum Allowed Mow Speed
1. In the Settings Menu, scroll down to Mow Speed and
press the right button.
position allows you to view and
position
N
position
FF
, set the passcode, and
N
position and then to the O
FF
2. Use the right button to increase the max full mow
speed in 5% increments between 50% and 100%.
3. Use the center button to decrease the max full mow
speed in 5% increments between 50% and 100%.
4. Press the left button to exit.
Setting the Maximum Allowed Transport Speed
1. In the Settings Menu, scroll down to Transport Speed
and press the right button.
2. Use the right button to increase the max transport
speed in 5% increments between 50% and 100%.
3. Use the center button to decrease the max transport
speed in 5% increments between 50% and 100%.
4. Press the left button to exit.
Turning the Smart Power ON/OFF
1. In the settings menu, scroll down to Smart Power.
2. Press the right button to switch between O
3. Press the left button to exit.
Setting the Counterbalance
1. In the Settings Menu, scroll down to Counter Balance
and press the right button.
2. Press the right button to switch between Low, Med,
and High.
When finished with the Protected Menu, press the left button
to exit to the Main Menu, then press the left button to exit
to the Run Menu.
Viewing the Fuel Consumption Rate
You can view the average fuel consumption rate for the
lifetime of the machine in the Service Menu.
Stationary Regeneration
If the Stationary Regeneration icon appears on the InfoCenter,
refer to the Service Manual or contact your Toro Distributor
for the maintenance procedure.
N
20
and O .
N FF