Table of Contents
Advertisement
Program Selection
You can select a program as shown below.
Number buttons
Use Number (0-9) buttons to select a program directly.
FAV button
Press to scroll through your favorite programs.
PR +/– buttons
Use PR +/– on the remote control or PROG 3 / 4 on
the front panel to cycle the recorder through the
programs in memory.
Program List
Three types of program lists are provided for easy and
quick program searching.
ANALOG TV: The list of all analog TV programs.
DIGITAL TV: The list of all digital TV programs.
RADIO: The list of all Radio programs.
Displaying Channel List and Changing
Channel
You can display channel list using the OK ( ) button
and switch into other channel on the channel list.
1. Press and hold OK ( ) for more than 1 seconds
while watching a program to display the channel list.
2. Select your desired channel using the 3 / 4 and
press OK ( ) to change the channel.
30
Switching Program List
You can switch the program list to DIGITAL TV,
ANALOG TV, or RADIO
1. Press v to move the highlight position to top of the
program list.
2. Press b / B to select a [DIGITAL TV],
[ANALOG TV], or [RADIO].
Selected program list appears.
Displaying the Favorite Program List
You can display favorite channel list: The list of the
favorite channels with several-groups that you can
organise channels by your private taste.
Note:
To set a favorite program, use [Program Edit] option in
the Setup menu. (See page 19.)
1. Press and hold OK ( ) for more than 1 seconds
while watching a program to display the channel list.
2. Press Red button. The favorite options appears.
3. Press v / V to select a favorite option then press
OK ( ).
The selected option's program list appears.
MHP Application
MHP (Multimedia Home Platform) is a common platform
for accessing a wide range of digital multimedia
services. Applications from various service providers are
interoperable with different MHP implementations.
If the [MHP Auto Start] option is set to [ON] on the
setup menu, then if the broadcast has the MHP
application, the application starts automatically.
If the [MHP Auto Start] option is set to [OFF], press MHP
button then select an application to start MHP application.
Advertisement
Table of Contents
