Table of Contents
Advertisement
To install, proceed as follows:
10.2.1 Installation of the mounting plate.
Wall split type:
By using a level, put the mounting plate in a
1)
perfect square position vertically and horizontally.
Drill 32mm deep holes in the wall to fix the plate.
2)
Insert the plastic anchors into the hole.
3)
Fix the mounting plate by using the provided
4)
tapping screws.
Check that the mounting plate is correctly fixed.
5)
Note: The shape of the mounting plate may be
different from the one above, but installation
method is similar.
Cassette and Duct type:
Wooden construction
Put the square timber over the roof beam, then install the
Air Conditioner Service Manual
hanging screw bolts.
For finished concrete bricks
300mm
Install the hanging hook with expansible bolt into the
concrete deep to 45~50mm to prevent loose.
New Concrete Bricks
Inlaying or embedding the screw bolts.
(Blade shape
insertion)
(Pipe hanging and embedding screw bolt)
Steel roof beam structure
Install the supporting angle steel.
Overhanging the indoor unit
Adjust the gasket (down side) to 90mm over the
ceiling.
Install the hanging bolt into T groove of the hanging
tool. Overhang the indoor unit and ensure it is level
using a level indicator.
Ti mber ove r the b eam
Roof beam
Ce ili ng
Hangi ng Screw
B o l t
(Slide insertion)
Steel bar
Embedding screw bolt
Hanging screw bolt
Hanging bolts
Ha ngi ng Bol t
Nu t (Up Si de )
Gasket (Up Sid e)
Insta ll ing Ea r
Ga ske t (Down Side )
Nu t (Do wn Sid e)
Do wn sid e of the ce ili n g
Supporting
angle steel
38
Advertisement
Table of Contents
