Summary of Contents for Panduit Atlona AT-ANC-108D
Page 1
AT-ANC-108D Update Instructions The following procedure outlines the firmware update procedure for the AT-ANC-108D using the USB port. 1. Download the firmware from the Atlona web site. 2. Press and hold Button 1 while connecting power to the power receptacle on the rear of the unit. Button 1 will flash three times, indicating that it is in firmware-update mode.
Page 2
Update Instructions 5. Delete all files from the USB UPDATE drive, if any are present. 6. Drag-and-drop the firmware file to the drive folder. Once the firmware update process has completed, the USB UPDATE folder will close, automatically. 7. Disconnect the USB cable from the AT-ANC-108D. The unit is now ready for use. Atlona Technical Support: +1 877.536.3976 option 1...