Identification Of Heating Appliances - Muller Intuitiv CAMPA CVVU10 Instructions For Installation And Use Manual

8. IDENTIFICATION OF HEATING APPLIANCES

IMPORTANT : THE APPLIANCE CHARACTERISTICS ARE SHOWN ON THE
IDENTIFICATION LABEL.
This conformity mark issued by the LCIE (Central Electrical Industry
Laboratory) is a guarantee that these appliances comply with all safety
standards in force.
This conformity mark, issued by the LCIE, also guarantees the
performance of these appliances which comply with functional suitability
standards.
Guarantees an average performance level
or
Guarantees a maximum performance level
or
Also incorporates energy saving features
or
Also incorporates presence/absence detection
When this mark is affixed by the manufacturer it guarantees that the
appliance complies with European Community safety directives (Low
Voltage Directive - LVD) and electromagnetic compatibility (EMC).
Classe II
Class 2 appliance : means that the appliance is double-insulated and
must therefore not be connected to the protective conductor (earth wire).
Protection Index of the appliance casing against the entry of solid bodies
IP...
and liquids.
IK...
Impact resistance index of the appliance casing.
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISCARDED WITH
HOUSEHOLD WASTE. PLEASE RECYCLE IN THE APPROPRIATE CENTRES.
The identification plate is located at the bottom right (command side) of your appliance to
identify it.
A : Full reference of the appliance and manufacturing index
B : Power rating in Watts
C : Date manufactured,
number and manufacturing
index to be specified for after-
sales service
D : Manufacturer number
A
serial
B
C
D
Page 63