Installation And Fixing - Muller Intuitiv CAMPA CVVU10 Instructions For Installation And Use Manual

4. INSTALLATION AND FIXING

- Ensure the minimum distances shown in Figs. B and C (pages 42 and 43) from the ground,
walls, curtains, etc.
- Place the wall bracket against the wall, ensuring that it is placed in the right direction and
mark the 6 fixing locations (Fig. C, page 43).
- This type of heater is heavy and must be handled and installed with care.
For this reason, the following is provided in a separate bag:
2 types of fixing pins suitable for all materials that can be used in the construction of a dwelling.
Depending on the type of materials, please take care in your choice of fixing pins.
Our liability cannot be incurred if the heater installation conditions did not comply with good
practice in this field.
- Drill and place suitable fixing pins.
- Attach the wall bracket to the 6 locations provided for this purpose:
Take care to mount the zinc-plated steel washers supplied with your appliance according to
the diagram below (Fig. D, page 44).
- Avoid installing the appliance in a draught that could disturb its adjustment.
Page 41