Table of Contents
Advertisement
3.2 Main Power
When the main power cord is connected to a working power outlet, all the
individual components can be powered ON.
If the individual components do not have power, check the following
locations:
1. Make sure the rocker switch
is in the RESET position for
power. You will need the Fun
Center tool kit to remove the
back panel of the main
cabinet to access the power
strip.
2. Make sure the power strip is
connected to the isolation
transformer.
3. Make sure the main power
cord is connected to the
isolation transformer.
4. Make sure the component is
properly connected to power.
See each component's section
for power connection
locations.
5. Inspect all the cords for
damage.
6. Make sure the fuse is not
damaged.
3.2 M
P
AIN
OWER
S
TARLIGHT
Reset
Main power cord
Isolation transformer
Fuse located behind main power cord
F
C
O
M
UN
ENTER
PERATION
Power strip (inside
pole shroud)
11
ANUAL
31
OF
Advertisement
Table of Contents
