Advertisement
Tool Description
Screw driver
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Unscrew the screws on the four fake front panels 1,and then remove the four fake front panels 1 from front panel 6.
Later,remove the film 7 and shielding fingers 8 from fake front panel 1.
2.
Unscrew the screws on pcb 2 and crashworthy birdges 3,and then remove pcb 2 and crashworthy birdges 3 from
front panel 6.
3.
Unscrew the screws on pcb 3,and then remove pcb 3 from front panel 6.
4.
Remove shielding fingers 4 from front panel 6.
5.
Remove film 5 from front panel 6.
6.
Remove all the lables.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
Tool Size (if
applicable)
2＃
Page 2
Advertisement
