Samsung GT-P5113 Service Manual page 32

Level 3 Repair
8-3-2. Initial
Re-download SW the cell-phone.
Check the AP Reset
nWARM_RESET(ZD700) = 1.8V(High)
Check the oscillator clock waveforms.
32.768KHz : OSC700(C718),
24Mhz : OSC600(C691)
Change UCP600,U701
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
Initial Failure
Yes
Abnormal
Yes
Normal
Abnormal
Change PBA
END
No
Check the UCP600 (crack, open, etc.)
Check the OSC700, OSC600.(Crack, open etc.)
Check the output clock waveforms and frequency.
Abnormal
※ Test condition (Oscilloscope setting)
: 20.0us.div (time division)
8-7