Samsung GT-P5113 Service Manual page 24

Level 2 Repair
6-1-2. assemble
1
Assemble KEY FPCB, MOTOR, SPK L/R
and LCD FPCB&rubber
SPK R
Be careful not to damage the FPCBs
3
Assemble the Battery and IF FPCB.
MIC RUBBER and attach INSU TAPE.
Be careful not to damage the FPCBs
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung's written authorization is strictly prohibited.
KEY FPCB
MOTOR
SPK L
7-3
2
Put the PBA to Bracket ass'y then connect
SPK L/R, KEY FPCB.
Assemble EAR JACK, EARJACK SUS,
3M/VGA CAM and LIGHT SENSOR. and
GPS Coaxial cable
Be careful not to damage the FPCBs
4
Attach 3 INSU TAPEs to connector.
Screw 14 points.
Be careful not to damage the FPCBs