Installation Instructions - Danby DCF035A5WDB Owner's Manual

INSTALLATION INSTRUCTIONS

LOCATION
• Two people should work together to move the freezer. Be careful and
lift with your knees, not your back!
• Remove all packaging before installation. Wipe the outside with a
soft, dry cloth and the inside with a warm, wet cloth.
• Do not place the freezer in direct sunlight or near sources of heat,
like a stove or heater, as this can increase electrical consumption.
Extreme cold ambient temperatures can cause the freezer to perform
improperly.
• Do not use the freezer near water, like in a wet basement or near a
sink.
• Wait approximately 4 - 6 hours before connecting the freezer to a
power source to reduce the possibility of a malfunction in the cooling
system from handling during transportation.
• This freezer is intended for free-standing installation only and is not
intended to be built into a cabinet or counter. Building in this freezer
can cause it to malfunction.
GARAGE READY
This freezer is Garage Ready! It is intended for indoor household and
garage use. Freezers are tested to perform in temperatures ranging
from -17 to 43°C / 0 to 110°F. It is not designed for outside installation,
including anywhere that is not temperature controlled.
5